Truck/Trailer/Container Locks and Seals

The best way to secure your vehicles and the cargo in them is to keep them from being taken or tampered with in the first place. CSA offers a variety of truck, trailer and container locks designed to protect your valuable transportation assets when they are unattended and most vulnerable. The TS-4A truck and TS-3A permanent trailer air brake locks provide the highest possible level of security by disabling the air brakes. Permanently installed on a vehicle, they are easily applied in seconds by simply taking out the key, locking down the brakes and rendering them immovable. Removable glad hand locks can be applied to trailers to temporarily immobilize them at loading docks or while parked in the yard. Navalock barrier seals are the ideal solution for securing trailers and containers while establishing and maintaining Chain of Custody.

TS-4A Tractor Air Brake Lock

Quite simply the best truck lock in the world.  To ensure tractors will not be stolen while left unattended, CSA Affiliate Rigsecure developed and patented the TS-4A Tractor Air Brake Lock. When engaged, this security locking device blocks the air line from the tractor to the air brakes in the tractor, and if connected, to the trailer.

Each

TS-4A Tractor Air Brake Lock
TS-4A Tractor Air Brake Lock
$329.00
$329.00

 

To ensure tractors will not be stolen while left unattended, CSA Affiliate Rigsecure developed and patented the TS-4A Tractor Air Brake Lock. When engaged, this security locking device blocks the air line from the tractor to the air brakes both in the tractor, and if connected, to the trailer.  The TS-4A Tractor Air Brake Lock is compatible with all air brake valve systems.  It can be configured for quick installation on all truck makes and models by your own maintenance staff.

TS-3A Trailer Resident Glad Hand Lock

TS-3A is a permanently installed glad hand lock designed to secure unattached and unattended trailers while on yards, in drop lots, in transit, on client sites or in rail yards.  The device is a simple mechanical air locking valve that is engaged when the there is no air in the trailer brake lines.

Each

$319.00
$319.00

TS-3A is a permanently installed glad hand lock designed to secure unattached and unattended trailers while on yards, in drop lots, in transit, on client sites or in rail yards.  The device is a simple mechanical air locking valve that is engaged when the there is no air in the trailer brake lines.  Upon disconnecting the trailer, the driver turns the key moving a ball valve in place so that no air can be re-introduced into the lines to raise the brakes.  TS-3A is plumbed directly into the air lines and requires a considerable amount of time to circumvent.

DUO GUARD CABLE SEAL

The DuoGuard Cable seal is a unique device that incorporates a standard bolt seal with a door to door cable seal.  This product provides both barrier protection to swing door trailers and contaners, while also providing a visual deterrent barrier to in-transit openings. The DuoGuard enables a user to form a robust figure 8 wrap for the keeper rods while using the more conventional bolt in a handle hasp protcol for sealing.  Even if the bolt is cut the cable will remain in place forcing thieves to have multiple tools and no possibility of replication of any component.

QUANTITY PRICING
Quantity Price
1+ $10.00
5+ $8.00
10+ $6.50
25+ $6.00
50+ $5.00
100+ $4.75
200+ $4.50
500+ $4.25
DualGuard Cable + Bolt Security Seal
DualGuard Cable + Bolt Security Seal on trailer
$10.00
$10.00

Our DualGuard seals include a 5mm diameter cable seal and 9mm bolt seal in a unitized construction. The cable and bolt seal are both C-TPAT compliant, meeting the new design and construction standards of ISO17712:2010. The cable is 76 inches long, which typically allows for a triple-wrap around the locking rods of a trailer or cargo container. The bolt seal secures the door latch. Sold in invividual seals. 25 seals per case.

Features and Benefits

Portable Glad Hand Lock

Glad Hand locks are used to secure trailers being loaded at docks from being moved.  This is both a safety issue and security recommended Best Practice.  Many warehouse injuries and deaths have occurred when drivers inadvertently pull the wrong trailer away from a dock while a fork lift operator is inside loading.  These mistakes can happen anywhere and use of this simple and effective device prevents them 100% of the time.

Each

Glad Hand Lock TS-2A
Glad Hand Lock TS-2A Installed
$52.50
$52.50

Glad Hand locks are used to secure trailers being loaded at docks from being moved.  This is both a safety issue and security recommended Best Practice.  Many warehouse injuries and deaths have occurred when drivers inadvertently pull the wrong trailer away from a dock while a fork lift operator is inside loading.  These mistakes can happen anywhere and use of this simple and effective device prevents them 100% of the time.  By assigning keys to loads, your foreman will always be able to certify that the right driver is taking the right load because he is unlocking his a

MS BAR LOCK 10

The MS Bar Lock 10 is basically the same technology as the MS Bar lock 11 but in a less expensive format. It is sold without the door to door cable.  This swing door trailer locking bar is ideally suited for both swing door trailers and sea containers for domestic and international shipping.

MS BAR LOCK 10
MS BAR LOCK 10 ON TRAILER
$29.50
$29.50

The MS Bar Lock 10 is a solid steel locking bar used to secure the opposing keeper rods on swing door trailers and sea containers from being opened during transit or storage. The robust system allows containers to be secured in seconds with a simple numbered cross member steel lock that can only be removed by a saw or dremil wheel. It is a C-TPAT and ISO 17712:2010 Compliant High (H) Security Seal.

MS BAR LOCK 11

This robust, uniquely numbered steel locking bar secures the opposing keeper rods on swing door trailers and sea containers from being opened while in transit. It incorporates an additional door to door cable seal to enhance the security process. It is ISO certified and approved under C-TPAT regulations as a high (H) security seal and has been independently tested and certified as such. The MS Bar Lock 11 provides the maximum protection available for trailer and container door security.

MS BAR LOCK 11 UNASSEMBLED
MS BAR LOCK 11 ON SWING DOOR TRAILER
$31.50
$31.50

The MS-BAR LOCK 11 is a solid steel locking bar which secures the keeper rods of a sea container or trailer with swing doors. It is by far the world's best barrier seal for containerized shipping. The components include the steel bar barrier seal plus a door to door, numbered, cable seal to secure the barrier seal to the door latch. Adding the cable seal offers these additional features:

Navalock MKIII-A Locking Bar

Intended for one-time use, The MKIIIA is a two part, steel, truck or container swing door locking device. It locks the opposing keeper rods of a standard swing door trailer or sea container from opening.

10 Navalocks per Box

MKIII-A installed with locking bushing and C01 Cable Seal
Navalock MKIIIA with numbered locking bushing and C01 Cable Seal
$29.50
$29.50

The MKIIIA is a two part, steel, truck or container swing door locking device. It locks the opposing keeper rods of a standard swing door trailer or sea container from opening.  The device is a patented mechanism that locks the rods with two opposing steel “J” hooks which are hand assembled across the swing door seams, from rod to rod, in such a manner as to prevent the doors from opening without removing the device, which can only be done with a diamond drill or Dremel wheel.

A minimum order of at least 10 is required.

Navalock MKII-B Locking Bar

Navalock MKII-B consists of a super heavy duty (3/8") steel locking bar secured by brackets that completely envelop the keeper bars.  Intended for one-time use, MKII-B is very difficult to cut with hand-operated tools

10 Navalocks per Box 

MKII-B with C-01 Cable seal
MKII-B with Lock Bushing only
$36.26
$36.26

Based on the proven Navalock® concept of locking and securing container and truck doors by uniting the door rods, the MKII-B is easy to fit without special skills or tools.  Its simple, all-steel design fits most standard containers and trucks.  Perpetrators cannot easily penetrate doors secured with the MKII-B since its heavy steel plate components are difficult to cut using common burglar’s tools such as double lever shears or break with a hammer, crowbar, etc.  One set of Navalock® MKII-B consists of:

Navalock MKIII-AL Locking Bar with NSLD Lock

Equipping the MKIIIA Navalock with a NSLD KD locking mechanism allows it to be re-used with a key.

10 MKIIIA's with NSLD locks and keys per Box

Navalock MKIII-A with NSLD lock mechanism
MKIII-A Navalock with NSLD lock mechanism on trailer doors
$80.00
$80.00

Equipping the MKIIIA Navalock with a NSLD KD locking mechanism allows it to be re-used with a key.  Based on the proven Navalock® concept of locking and securing container and truck doors by uniting the door rods, MKIII-A is easy to fit without special skills or tools.  Its simple, all-steel design fits most standard containers and trucks.  Perpetrators cannot easily penetrate doors secured with the MKIII-A since its heavy steel plate components are difficult to cut using common burglar’s tools such as double lever shears or break with a hammer, crowbar, etc.  Intended t

Enter "yes" if all locks are to be keyed the same, i.e., using the same key; otherwise enter "no" and they will all be keyed differently

This product must be ordered in sets of 10.
A minimum order of at least 10 is required.

Navalock MKII-BL Locking Bar with NSLD Lock

Equipping the MKII-B Navalock with a NSLD locking mechanism allows it to be re-used with a key.  Each Locking Bar comes with two keys.

10 MKII-B's with NSLD locks and keys per Box

Navalock MKII- BL
Navalock MKII-BL with NSLD KD and C-01 Cable Seal
$90.50
$90.50

The MKIIB-L is a dual purpose product, a lock and a seal. The key operated device provides the locking feature through the 14.5 mm (9/16") round hole and the extra 12 mm (1/2") aperture at the tip of the locking bar permits to fit a customs accepted seal such as the C-01 Cable Seal, which turns the MKIIB-L into a seal.

Enter "yes" if all locks are to be keyed the same, i.e., using the same key; otherwise enter "no" and they will all be keyed differently

This product must be ordered in sets of 10.
A minimum order of at least 10 is required.
Syndicate content